Analisis Pengembangan Sistem Informasi Green Supply Chain Pengerajin Jumputan Berbasis Demand Driven

  • Muhammad Izman Herdiansyah Universitas Bina Darma, Indonesia https://orcid.org/0000-0003-1110-6604
  • Dedy Syamsuar Universitas Bina Darma, Indonesia
  • Ahmad Syazili Universitas Bina Darma, Indonesia
DOI: 10.51519/journalisi.v3i4.209
Keywords: Green Supply Chain; Jumputan; Prototipe Sistem; Bank Limbah

Abstract

Konsep green supply chain (GSC) banyak diterapkan dalam mengatasi permasalahan limbah industri, seperti pengerajin tekstil tradisional Jumputan Palembang. Proses pembuatan kain jumputan menggunakan air dan menghasilkan limbah cair yang berpotensi membahayakan lingkungan. Penerapan konsep teknologi ramah lingkungan dalam pengelolaan rantai pasokan bisnis dapat mengatasi hal tersebut jika dikelola dengan optimal. Paper ini menyajikan hasil analisis jaringan GSC dalam bentuk model proses dan prototipe sistem informasi yang dapat digunakan oleh pengerajin untuk mengolah data pengadaan, produksi, dan penjualan produk jumputan mereka, serta yang tidak kalah pentingnya adalah pengelolaan data limbah cair. Limbah cair ini akan diproses menjadi air bersih kembali oleh pengerajin secara bersama-sama. Dihasilkan beberapa model GSC yang dapat digunakan oleh peneliti, pengerajin maupun pemerintah untuk mengatasi permasalahan dampak lingkungan dari limbah proses pembuatan kain jumputan. Model analisis yang dihasilkan dapat digunakan untk mengoptimalkan proses produksi dan penjualan kain jumputan oleh pengerajin. Di saat yang sama juga dapat dihasilkan model bisnis baru terkait pengolahan limbah produksi ini, yaitu dengan menghadirkan atau membuat unit bank limbah. Konsep model bank limbah ini dapat mengoptimalkan pengendalian dampak lingkungan akibat limbah cair produksi jumputan di kawasan industri pengerajin jumputan, dan hasil ini dapat direplikasi di kawasan industri yang lain dalam bentuk yang sejenis.

Downloads

Download data is not yet available.

References

Intan, B., Herdiansyah, M. I., & Diana, D., “Pemodelan Pengolahan Limbah Kerajinan Jumputan Palembang Berbasis “Green Supply Chain Network,” Jurnal Bina Komputer, vol. 1(1), pp. 20-32, 2019.

Lelitasari, A., Herdiansyah, M. I., Mirza, A. H., Syamsuar, D., & Antoni, D., “Jumputan Wastewater Optimization Model Using Green Logistic Network Approach,” in 2019 International Conference on Electrical Engineering and Computer Science (ICECOS), 2019 IEEE, 2019, pp. 321-325.

Irvai, M., & Herdiansyah, M. I. , ”Model Optimasi Jaringan Rantai Pasok Pada Sistem Informasi Harga Karet Rakyat Berbasis Web,” Jurnal Media Informatika Budidarma, vol. 5(2), pp. 600-608, 2021.

Herdiansyah, M. I., Syamsuar, D., & Ismail, A. F., “Mixed Integer Linear Programming Model for Optimizing Batik Palembang Supply Chain Network,” Advanced Science Letters, vol. 24(11), pp. 8422-8426, 2018.

Asrawi, I., Saleh, Y., & Othman, M., “Integrating drivers’ differences in optimizing green supply chain management at tactical and operational levels,” Computers & Industrial Engineering, pp. 122-134, 2017.

Sangaiah, A. K., Tirkolaee, E. B., Goli, A., & Dehnavi-Arani , S., “Robust optimization and mixed-integer linear programming model for LNG supply chain planning problem,” Soft Computing 24, pp. 7885-7905, 2020.

Wei, D., “Modeling and Simulation of a Multi-agent Green Supply Chain Management System for Retailers,” Journal Européen des Systèmes Automatisés, vol. 53(4), pp. 549-557, 2020.

Govindan, K., Cheng, T., Mishra, N., & Shukla, N., “Big data analytics and application for logistics and supply chain management,” Transportation Research Part E: Logistics and Transportation Review, vol. 114, 343-349, 2018.

Chand, M., Bhatia, N., & Singh, R. K., “ANP-MOORA-based approach for the analysis of selected issues of green supply chain management,” Benchmarking: An International Journal, vol. 25(2), 642-659, 2018.

Goodarzian, F., Hossein-Nasab, H., Munuzuri, J., & Bagher, M.,”A multi-objective pharmaceutical supply chain network based on a robust fuzzy model: A comparison of meta-heuristics,” Applied Soft Computing, 92, 2020.

Herdiansyah, M. I., Yuliwati, E., Mahyudin, M., & Ismail, A. F., “Mathematical Model of Optimum Composition on Membrane Fabrication Parameters for Treating Batik Palembang Wastewater,” Journal of Engineering and Applied Sciences, vol. 12(4), pp. 797-802, 2017.

Srivastava, S. K., ”Green supply-chain management: A state-of-the-art literature review,” International Journal of Management Review, vol. 9(1), pp. 53-80, 2007

Islam, S., Noorliza, K., Fauzi, F. b., & Soliman, S. M.,“A review on green supply chain aspects and practices: Management and Marketing,” Challenges for the Knowledge Society, vol. 12(1), pp. 12-36, 2017.

Published
2021-12-28
Abstract views: 2522 times
Download PDF: 2212 times
How to Cite
Herdiansyah, M., Syamsuar, D., & Syazili, A. (2021). Analisis Pengembangan Sistem Informasi Green Supply Chain Pengerajin Jumputan Berbasis Demand Driven. Journal of Information Systems and Informatics, 3(4), 662-672. https://doi.org/10.51519/journalisi.v3i4.209
Issue
Vol 3 No 4 (2021): Journal of Information Systems and Informatics
Section
Articles
  1. I certify that I have read, understand and agreed to the Journal of Information Systems and Informatics (Journal-ISI) submission guidelines, policies and submission declaration. Submission already using the provided template.
  2. I certify that all authors have approved the publication of this and there is no conflict of interest.
  3. I confirm that the manuscript is the authors' original work and the manuscript has not received prior publication and is not under consideration for publication elsewhere and has not been previously published.
  4. I confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
  5. I confirm that the paper now submitted is not copied or plagiarized version of some other published work.
  6. I declare that I shall not submit the paper for publication in any other Journal or Magazine till the decision is made by journal editors.
  7. If the paper is finally accepted by the journal for publication, I confirm that I will either publish the paper immediately or withdraw it according to withdrawal policies
  8. I Agree that the paper published by this journal, I transfer copyright or assign exclusive rights to the publisher (including commercial rights)