Designing Web-Based Warehouse Information System at CV Ribka Furniture

Perancangan Sistem Informasi Gudang Berbasis Web di CV Ribka Furniture

Authors

  • Jody Barata Dwi Pradipta Satya Wacana Christian University, Indonesia
  • Augie David Manuputty Satya Wacana Christian University, Indonesia
Pages Icon

DOI:

https://doi.org/10.33557/journalisi.v3i1.99

Keywords:

Inventory Information System, Unified Modeling Language(UML), transaksi alat dan bahan

Abstract

CV Ribka Furniture merupakan salah satu perusahaan yang bergerak di bidang perdagangan dan pembuatan furniture. Dalam kegiatan operasional gudang merupakan bagian yang penting. Namun proses data transaksi masih dilakukan secara manual. Sehingga beberapa kendala masih dialami, seperti kesalahan penginputan saat transaksi pada alat / bahan, yang mengakibatkan perbedaan dalam penginputan data. Penelitian ini dilakukan untuk membuat sistem informasi persediaan yaitu pengumpulan data alat dan transaksi material yang akan keluar masuk. Sistem informasi ini dibuat dengan menggunakan diagram UML (Unified Modeling Language) yaitu: use case diagram dan class diagram. Kemudian membuat desain antarmuka untuk proses implementasi dan pengujian sistem. Dengan pembuatan sistem informasi inventaris,

 

Downloads

Download data is not yet available.

References

A. Menggunakan and F. Cobit, “Teknologi Informasi Terhadap Strategi Bisnis ( Studi Kasus PT . BRI , Tbk ) Adityawarman Universitas Diponegoro ABSTRACT Strategic alignment between Information Technology ( IT ) and business has become CIOs and CEOs primary concern nowadays . This shows ,” vol. 1, pp. 166–177.

S. Zalukhu and I. Handriani, “Aplikasi Sistem Inventory ( Studi Kasus : Pt . Cakra Medika Utama ),” Jsai, vol. 2, no. 1, pp. 116–122, 2019.

G. I. Wibowo, A. M. Rumagit, and N. J. Tuturoong, “Perancangan Aplikasi Gudang Pada Pt. Pakan Ternak Sejati,” J. Tek. Elektro dan Komput., vol. 3, no. 4, pp. 11–18, 2014.

G. W. Sasmito, “Penerapan Metode Waterfall Pada Desain Sistem Informasi Geografis Industri Kabupaten Tegal,” J. Inform. Pengemb. IT, vol. 2, no. 1, pp. 6–12, 2017.

H. Nur, “Penggunaan Metode Waterfall Dalam Rancang Bangun Sistem Informasi Penjualan,” Gener. J., vol. 3, no. 1, p. 1, 2019, doi: 10.29407/gj.v3i1.12642.

D. Margareta, N. Kurniawati, Laela. Duta, “Rancang Bangun Sistem Informasi Pengolahan Data Persediaan Barang Berbasis Dekstop Dengan Model Waterfall,” vol. 13, no. No. 2, 2017.

D. Andriansyah, “Penerapan Model Waterfall Pada Sistem Informasi Layanan Jasa Laundry Berbasis Web,” Indones. J. Softw. Eng., vol. 4, no. 1, pp. 27–32, 2018, doi: 10.31294/ijse.v4i1.6291.

D. Andriansyah, “Sistem Informasi e-ProfileSubjek Pajak Pada Kecamatan Kembangan Jakarta Barat Menggunakan Metode Waterfall,” vol. 1, no. 1, pp. 1–10, 2016, [Online]. Available: http://ejournal-binainsani.ac.id/index.php/IMBI/article/view/149.

A. Hirmawan, M. P, and D. Azizah, “Analisis Sistem Akuntansi Penggajian Dan Pengupahan Karyawan Dalam Upaya Mendukung Pengendalian Intern (Studi pada PT.Wonojati Wijoyo Kediri),” J. Adm. Bisnis S1 Univ. Brawijaya, vol. 34, no. 1, pp. 189–196, 2016.

Y. Firmansyah and U. Udi, “Penerapan Metode SDLC Waterfall Dalam Pembuatan Sistem Informasi Akademik Berbasis Web Studi Kasus Pondok Pesantren Al-Habib Sholeh Kabupaten Kubu Raya, Kalimantan Barat,” J. Teknol. dan Manaj. Inform., vol. 4, no. 1, 2017, doi: 10.26905/jtmi.v4i1.1605.

V. O. Carvalho, “Rancang Bangun Sistem Informasi Pengolahan Data Persediaan Barang Berbasis Dekstop Dengan Model Waterfall,” J. PILAR Nusa Mandiri, vol. 13, no. 1, pp. 233–238, 2017.

K. Kusnandar, “Rancang Bangun & Analisis Sistem Sistem Informasi Perpustakaan Menggunakan Model Waterfall (Studi Kasus: Stmik Wicida Samarinda),” Sebatik, vol. 16, no. 1, pp. 16–25, 2016, doi: 10.46984/sebatik.v16i1.76.

Downloads

Published

2021-03-02

Issue

Vol. 3 No. 1 (2021): Journal of Information Systems and Informatics

Section

Articles

License

Authors Declaration

  1. The Authors certify that they have read, understood, and agreed to the Journal of Information Systems and Informatics (JournalISI) submission guidelines, policies, and submission declaration. The submission has been prepared using the provided template.
  2. The Authors certify that all authors have approved the publication of this manuscript and that there is no conflict of interest.
  3. The Authors confirm that the manuscript is their original work, has not received prior publication, is not under consideration for publication elsewhere, and has not been previously published.
  4. The Authors confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
  5. The Authors confirm that the manuscript is not copied from or plagiarized from any other published work.
  6. The Authors declare that the manuscript will not be submitted for publication in any other journal or magazine until a decision is made by the journal editors.
  7. If the manuscript is finally accepted for publication, the Authors confirm that they will either proceed with publication immediately or withdraw the manuscript in accordance with the journal’s withdrawal policies.
  8. The Authors agree that, upon publication of the manuscript in this journal, they transfer copyright or assign exclusive rights to the publisher, including commercial rights

How to Cite

[1]
J. B. D. Pradipta and A. D. Manuputty, “Designing Web-Based Warehouse Information System at CV Ribka Furniture: Perancangan Sistem Informasi Gudang Berbasis Web di CV Ribka Furniture”, journalisi, vol. 3, no. 1, pp. 121–134, Mar. 2021, doi: 10.33557/journalisi.v3i1.99.

Most read articles by the same author(s)