IoT-Based Smart Door Lock System with Fingerprint and Keypad Access

  • Ketut Ananta Kevin Permana Udayana University, Indonesia
  • I Nyoman Piarsa Udayana University, Indonesia
  • Anak Agung Ketut Agung Cahyawan Wiranatha Udayana University, Indonesia
DOI: 10.51519/journalisi.v6i3.844
Keywords: Internet of Things, ESP-32, Keypad, Fingerprint, Android

Abstract

Doors are important components in a home, serving as entry points, room dividers, and security barriers. Door locks have evolved from manual mechanisms to automatic systems using technologies such as passwords, face sensors, and fingerprint sensors. To enhance practicality and efficiency, an Internet of Things (IoT)-based Smart Door Lock system using keypads and fingerprint sensors was developed in this research. The system was built using the Waterfall model Software Development Life Cycle (SDLC) and utilizes Firebase for real-time data communication and control through an Android application. Black box testing was conducted to verify the system’s functionality, achieving a 100% success rate across 20 trials. The system offers enhanced security and remote access control, with potential applications in both residential and commercial settings.

Downloads

Download data is not yet available.

References

A. N. Mas Erwan, M. N. H. Muzaffar Alfian, and M. S. Mohamad Adenan, "Smart Door Lock," Int. J. Recent Technol. Appl. Sci., vol. 3, no. 1, pp. 1–15, Mar. 2021, doi: 10.36079/lamintang.ijortas-0301.194.

A. S. Ariffin and N. Harum, "Smart Door Lock System by Using Face Recognition," in Conf. Bus. Soc. Sci. Technol. (CoNeScINTech), vol. 3, no. 1, pp. 46–55, Aug. 2023.

R. Saputra and N. Surantha, "Smart and real-time door lock system for an elderly user based on face recognition," Bull. Electr. Eng. Inform., vol. 10, no. 3, pp. 1345–1355, Jun. 2021, doi: 10.11591/eei.v10i3.2955.

A. C. Frobenius, J. Kuswanto, R. Ardiansyah, and F. W. Y. Untoro, "Perancangan Prototipe Kunci Pintu Digital Berbasis IoT Menggunakan Metode HDLC," Jambura J. Electr. Electron. Eng., vol. 5, no. 2, pp. 148–156, 2023.

R. Rizky et al., "Penerapan Metode Fuzzy Sugeno Untuk Pengukuran Keakuratan Jarak Pada Pintu Otomatis di CV Bejo Perkasa," J. Tek. Inform. Unika St. Thomas (JTIUST), vol. 5, no. 1, 2020.

N. U. Putri et al., "Pelatihan Doorlock Bagi Siswa/Siswi Mas Baitussalam Miftahul Jannah Lampung Tengah," J. Technol. Soc. Community Serv. (JTSCS), vol. 3, no. 2, pp. 198–203, 2022.

P. E. S. Dita, A. A. Fahrezi, P. Prasetyawan, L. Ratu, and B. Lampung, "Sistem Keamanan Pintu Menggunakan Sensor Sidik Jari Berbasis Mikrokontroller Arduino UNO R3," J. Tek. Sist. Komput. (JTIKOM), vol. 2, no. 1, 2021.

A. Z. Rohman, Sunardi, and A. Munazilin, "Rancang Bangun Smart Door Lock Menggunakan Fingerprint dan Mikrokontroler Arduino Uno di BMT NU Jangkar," G-Tech: J. Technol. Appl., vol. 7, no. 4, pp. 1245–1253, Oct. 2023, doi: 10.33379/gtech.v7i4.3029.

A. H. Bachtiar, P. P. Surya, and R. P. Astutik, "Rancang Bangun Dual Keamanan Sistem Pintu Rumah Menggunakan Pengenalan Wajah dan Sidik Jari Berbasis IoT (Internet of Things)," J. POLEKTRO: J. Power Electron., vol. 11, no. 1, 2022.

E. Z. Orji, U. I. Nduanya, and C. V. Oleka, "Microcontroller Based Digital Door Lock Security System Using Keypad," Int. J. Latest Technol. Eng. Manag. Appl. Sci. (IJLTEMAS), vol. 8, no. 1, pp. 92–97, 2019.

R. Wahyuni, Y. Irawan, and Z. P. Noviardi, "Alat Pengaman Pintu Dengan Password Menggunakan Arduino Uno at Mega 328p dan Selenoid Door Lock," J. Inform. Manaj. Komput., vol. 12, no. 1, 2020.

R. Suwartika and G. Sembada, "Perancangan Sistem Keamanan Menggunakan Solenoid Door Lock Berbasis Arduino Uno pada Pintu Laboratorium di PT. XYZ," J. E-Komtek (Electro-Comput. Technol.), vol. 4, no. 1, pp. 62–74, Jun. 2020, doi: 10.37339/e-komtek.v4i1.217.

A. Salam and S. B. Bhaskoro, "Sistem Keamanan Cerdas pada Kunci Pintu Otomatis menggunakan Kode QR," Cybern., vol. 5, no. 1, pp. 1–11, 2021.

I. T. Maulana, "Penerapan Metode SDLC (System Development Life Cycle) Waterfall Pada E-Commerce Smartphone," J. Ilm. Sist. Inform. Ilmu Komput., vol. 2, no. 2, pp. 1–6, 2022.

F. Asrin and G. V. Utami, "Implementing Website-Based School Information Systems in Public Elementary Schools Using Waterfall Model," J. Inf. Syst. Inform., vol. 5, no. 2, pp. 590–614, May 2023, doi: 10.51519/journalisi.v5i2.495.

B. M. Sidhunata et al., "Point of Sales (POS) System Design using Design Thinking Framework for Motorcycle Workshop," J. Inf. Syst. Inform., vol. 5, no. 3, pp. 874–886, Aug. 2023, doi: 10.51519/journalisi.v5i3.515.

Published
2024-10-01
Abstract views: 65 times
Download PDF: 44 times
How to Cite
Permana, K. A., Piarsa, I., & Wiranatha, A. A. K. A. (2024). IoT-Based Smart Door Lock System with Fingerprint and Keypad Access. Journal of Information Systems and Informatics, 6(3), 2086-2098. https://doi.org/10.51519/journalisi.v6i3.844
Issue
Vol 6 No 3 (2024): Journal of Information Systems and Informatics
Section
Articles

Copyright (c) 2024 Journal of Information Systems and Informatics

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

  1. I certify that I have read, understand and agreed to the Journal of Information Systems and Informatics (Journal-ISI) submission guidelines, policies and submission declaration. Submission already using the provided template.
  2. I certify that all authors have approved the publication of this and there is no conflict of interest.
  3. I confirm that the manuscript is the authors' original work and the manuscript has not received prior publication and is not under consideration for publication elsewhere and has not been previously published.
  4. I confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
  5. I confirm that the paper now submitted is not copied or plagiarized version of some other published work.
  6. I declare that I shall not submit the paper for publication in any other Journal or Magazine till the decision is made by journal editors.
  7. If the paper is finally accepted by the journal for publication, I confirm that I will either publish the paper immediately or withdraw it according to withdrawal policies
  8. I Agree that the paper published by this journal, I transfer copyright or assign exclusive rights to the publisher (including commercial rights)